Can I see the raw data from my ride?

Yes if you scroll to the right along the chart view bar and select "Edit".

Then, you will see a tool bar along the bottom of the page where you can find different data fields. 

• Related Articles

• Why is Golden Cheetah so slow to compute the data to get the CdA?

  In some cases, it takes much time for GC Notio to compute your data or just opening an activity. There are different causes. 1. The length of the activity. The longer the ride is, the slower the process will be because there are many data. The main ...

• Find a calibration ride out and back segments

  To have a more accurate CdA, the Notio device needs to be calibrated as a power meter would. But it is more tedious because we need to perform a calibration ride which is composed of an out segment and a back segment both with the same length. The ...

• Golden Cheetah Notio won't compute my ride.

  The ride will not compute in Golden Cheetah if there are no power or no speed data associated.   To verify it, select the Activity then the Edit chart. Along the bottom, you will see tabs labelled STANDARD, BCVX, etc. If the activity has been ...

• Here is the procedure to install the Notio Data field in Garmin Edge unit.

  You will need Notio Aero Sensor, an iOS Device (iOS version 11+), iOS Notio App, and your Garmin Edge unit for this step.  Notio Aero Sensor iOS Device (iOS version 11+) iOS Notio App Garmin Edge The following sequence can be done from your computer ...

• Setup the auto backup

  In Golden Cheetah Notio, you have the possibility to backup a specific athlete profile data manually. It is also possible to setup an automatic backup. In the application settings, go to the “Backup” tab of the athlete section. There are two ...