How should I position the Notio on my bike?

Make sure that the mount is well centered using your front wheel as a guide. As far forward as possible on your extensions also allowing good hand positioning. Level to the ground using the Pitot tube as a guide. Fixed securely eliminating any noticeable movement. Notio is compatible with brackets that have a GoPro-style interface and it comes with 2 brackets: one for road bike handlebars and one for the time trial/triathlon bars. 

We know that some cockpit configurations make it difficult to install the Notio. In particular, by positioning it according to the instructions given in the video. If you can't mount your Notio on your aero bars, you can mount it on your base bar at the front. Some of Notio's ambassadors, well-known top cyclists such as Dan Bigham and Martin Toft Madsen, have concluded that mounting Notio on the front of the base bar will not affect data collection.

• Related Articles

• Notio installation issue with my cockpit

  I have unusual TT cockpit.  And the way I have mounted the Notio doesn't corresponded to the installation recommandation you provided in this video:  There are a lot of different configurations due to the positioning and type of cockpit. This is why ...

• How-to videos | Setup basics

  In this first video, we will go through Notio to set up basics such as : Unboxing Mount the Notio aero sensor on your bike. ​ Watch our next video about Notio sensor pairing and configuration by clicking HERE. 

• Do I need to calibrate the Notio before each use?

  It is not necessary to calibrate the Notio before each test session. Once the initial calibration is performed and your new calibration factor replaces the default value of 1.39 in the app, there is no need to recalibrate the unit. However, for each ...

• What is the Calibration factor?

  The calibration factor results from the calibration of the Notio so that the pitot tube measures the wind as accurately as possible. The calibration factor is used in the calculation of the CdA and the wind. The way the wind comes into contact with ...

• How do we calibrate the Notio in an indoor velodrome?

  Here are basics guidelines to calibrate the Notio in an indoor velodrome. Speed sensor In the indoor velodrome, a magnet-based speed sensor is recommended over a hub mount for better speed accuracy. Distance The recommended distance to calibrate the ...